Federal Specifications
L-P-315 Polyethylene Pipe
L-P-349A Cellulose Acetate Butyrate Molding & Extrusions
L-P-370 Copolymer of Vinyl & Vinylidene Chloride Plastic Form
L-P-375B Vinyl Chloride Plastic Film, Flexible
L-P-377A Polyethylene Terephthalate Plastic Film
L-P-378A Polyethylene Plastic Film, Thin Gage
L-P-380 Methacrylate Molding Material
L-P-383 Glass Fiber Base, Low Pressure Polyester Resin Laminated
L-P-385A Polychlorotrifluorethylene (KEL-F) Molding Material
L-P-388 Cellular Urethane, Flexible
L-P-387 Polyethylene Low & Medium Density Molding Material
L-P-389A FEP Fluorocarbon for Molding & Extrusion
L-P-390A Low & Medium Density Polyethylene Molding Material
L-P-391A Methacrylate Sheets, Rods & Tubes, Cast
L-P-392A Acetal Material, Injection Molding & Extrusion
L-P-393A Polycarbonate Material, Molding & Extrusion
L-P-394A Polypropylene Material for Injection Molding & Extrusion
L-P-395A Polyamide (Nylon) Molding Material, Glass Fiber Filled
L-P-396 Polystyrene Molding Material
L-P-397 Cellulose Acetate, Molding Material
L-P-398 Styrene Butadene Molding Material
L-P-399 Styrene-Acrylonitrite Molding Material
L-P-401 Urea-Formaldehyde Molding Material
L-P-403 Polytetrafluoroethylene (Teflon TFE) Molding Material
L-P-410 Polyamide (Nylon), Rigid, Sheets, Rods, Tubes & Molded Parts
L-P-501 Polyvinylidene Chloride (Saran) Molded
L-P-503 Polyvinyl Chloride Rod, Solid & Rigid
L-P-504B  Cellulose Acetate Sheet & Film
L-P-505B Shatter-Resistant, Rigid, Reinforced Translucent Corrugated Sheet, Polyester Acrylic or Combination
L-P-506 Polystyrene, Biaxially Oriented Sheet & Film
L-P-507 Acrylic Sheet, Extruded
L-P-508 Laminated, Decorative & Non-Decorative Plastic Sheet
L-P-509A Thermoset Sheet, Rod & Tube
L-P-510A Polyvinyl-Chloride Sheet, Rigid, High Impact
L-P-511 Thermoset Phenolic Sheet, Cotton Reinforced, Post-Forming
L-P-512A Polyethylene Sheet
L-P-513A Thermoset Phenolic Sheet, Paper Reinforced
L-P-514A Adhesive-Coated, Paper-Backed, Plastic Sheet
L-P-516A Thermosetting Resins Cast from Monomers Sheets & Rods
L-P-517A Scribe-Coated Plastic Sheet
L-P-519B Tracing, Glazed & Matte Finish Plastic Sheet
L-P-523 FEP Fluorocarbon Extruded Sheet & Film
L-P-524 Polyethylene, Laminated, Nylon Reinforced Sheet
L-P-527A Styrene-Butadine Sheet
L-P-52SA Cellulose Acetate & Polyester Sheet Adhesive Coated
L-P-535 Polyvinylchloride & PVC Vinyl Acetate Copolymer Film Rigid
L-P-540 Polyvinylchloride Tube Heavy Wall Rigid
L-P-545 Polyethylene Tubing, Flexible
L-P-590 Polyethylene Sheets, Rods, Tubing
L-P-1036 Polyvinylchloride Heavy Wall
L-P-1040 Polyvinylfluoride Sheets & Strips
L-P-1125 Phenolic Resin Molding Material
L-P-1174  Chlorotrifluoroethylene Copolymer Extruded
L-P-1183 ABS Rigid Molding Material

Other specifications: Military | AMS | Federal

Back to SPEC page

For INFO E-Mail:JACO-MTP

to report problems with site please email webmaster